ANSI A117 1 2003 EPUB
ANSI A (), Standard for Accessible and Usable Buildings and Facilities as mandated by law and incorporated by reference by the States and. ICC Accessible and Usable Buildings and Facilities DWELLING UNITS AND SLEEPING UNITS · ERRATA TO ICC/ANSI A, SECOND. The specifications in this standard make sites, facilities, buildings and elements accessible to and usable by people with such physical disabilities as the inability .
|Published (Last):||19 September 2008|
|PDF File Size:||14.29 Mb|
|ePub File Size:||11.15 Mb|
|Price:||Free* [*Free Regsitration Required]|
Thresholds and changes in level at doorways shall comply with Section. A turning space com- plying with Section shall be provided within the room.
ICC/ANSI A117.1 – 2003 (Accessible and Usable Buildings and Facilities)
All steps on a flight of stairs shall have uniform riser height and uniform tread depth. Where handrails are required at ansi a117 1 2003 side of a corridor they shall comply with Sec- tions A knee clearance of 24 inches mm minimum above the floor ansi a117 1 2003 be permitted at lavatories and sinks used primarily by children ages 6 through 1 2 where the rim or counter surface is 31 inches mm maximum above the floor.
Where doorways are adja- cent to a ramp landing, maneuvering clearances required by Sections 2030, facilities, buildings, and elements required to be accessible shall comply with the applicable provisions of Chapters 3 through 9.
Call buttons shall have vis- ible signals to indicate when each call is regis- tered and when each call is answered. A short ramp cutting through a curb ans built up to it. Communication Elements and Features General The verbal annun- ciator shall have a frequency of Hz min- imum ansi a117 1 2003 3, Hz maximum. The high side reach shall be 48 inches mm maximum for a reach depth of 10 inches mm maximum.
Grab bars shall not be provided above the seat. W117 door shall be self-closing. Schoonover, PE P Acknowledgment The updating of this standard over the past 5 years could only be accomplished by the hard work of not only the current committee members listed at the time of approval but also the many ansi a117 1 2003 mittee members who participated and contributed to the process over the course of develop- ment.
Full text of “ANSI A (): Accessible and Usable Buildings and Facilities”
Horizontal grab bars shall be provided across the control wall and on the back wall to a point 18 inches mm from the control wall. Floor selection shall be accomplished by applying momentary or ansi a117 1 2003 stant pressure to the up or down scan button. Edge protection comply- ing with Section Maneuver- ing clearances at power-assisted doors shall comply with Section In alternate roll-in showers, the controls and hand shower ansi a117 1 2003 be located 38 inches mm minimum and 48 inches mm maximum above the showerfloor.
Accessible Routes labile The force required to activate operable parts shall be 5.
ICC/ANSI A – (Accessible and Usable Buildings and Facilities)
Pedestrian signals are not required to comply with the ansi a117 1 2003 for choosing audible tones. Visual characters shall comply with Section A swing-up grab bar shall be installed with the centerline of the grab bar 15? Pictograms shall contrast with their fields, with either a light pictogram on a dark field or annsi dark pictogram on a light field. An entry 36 inches 91 5 mm ansi a117 1 2003 in width shall be provided at one end of the inch mm width of the compartment.
Openings, doors and doorways without doors more than 24 inches mm in depth shall provide a ansj opening width of 36 inches mm minimum.
The height of bathtub seats shall be 17 inches mm minimum to 19 inches mm ansi a117 1 2003 above the bathroom floor, measured to the top of the seat. Committee approval of the Standard does not necessarily imply that all Committee members 1a17 for its approval.
ANSI A117.1 (2003): Accessible and Usable Buildings and Facilities
The telephone handset shall be capable of being placed flush on the surface of the shelf. Type B units shall comply with Section 1 The width of the uppercase letter “O” of the font shall be 55 per- cent minimum and percent maximum of the height of the uppercase “I” of the font.
Floor surfaces of curb ramps shall comply ansi a117 1 2003 Section Visible indica- tors shall comply with Section Water and soap flow shall be provided ansi a117 1 2003 a reach depth of 1 1 inches mm maximum.
Telephones shall have push button controls where service for such equipment is available. Handles, pulls, latches, locks, and other operable parts on accessible doors shall have a shape that is easy to grasp with one hand and does ansi a117 1 2003 require tight grasp- ing, pinching, or twisting of the wrist to operate. Building Blocks a b Fig. Floor surfaces shall be stable, firm, and slip resistant, and shall comply with Section Grab bars with a circular cross section shall have an outside diameter of 17 4 inch 32 mm minimum and 2 inches 51 mm maximum.
The angle of the water stream from spouts within 3 inches ansi a117 1 2003 mm of the front of the drinking ansi a117 1 2003 shall be 30 degrees maximum, and from spouts between 3 inches 76 mm and 5 inches mm from the front of the drinking fountain shall be 15 degrees maximum, measured horizontally relative to the front face of the drinking fountain. The space between the grab bars and shower controls, shower fittings, and other grab bars above the grab bar shall be per- mitted to be 1 V 2 inches 38 mm minimum.